Français 
English 
العربية 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog It is common for cutting machines to malfunction during processing, and solving these faults requires taking corresponding measures based on specific causes. Here are some common faults and their solutions:
1. * * Poor cutting quality * *:
-Check if the saw blade is worn or not sharp, and if so, replace the saw blade.
-Check if the cutting parameters are set correctly, including cutting speed, power, frequency, etc., and adjust them according to the material type and thickness.
-Check the stability and fixation of the cutting machine to ensure there is no looseness or vibration.
2. * * Machine cannot start * *:
-Check if the power supply is normal, if the wiring is well connected, and if there are any short circuits or open circuits.
-Check if the fuse is blown, and replace it promptly if necessary.
3. * * Motor overheating or abnormality * *:
-Check if the motor is overloaded and adjust the load to reduce the burden on the motor.
-Check the heat dissipation of the motor and clean the dust and debris on the radiator.
-If the motor malfunctions, it may require repair or replacement.
4. * * Stuck or abnormal sound during cutting process * *:
-Check if the saw blade is stuck or damaged, clean up debris and replace the damaged saw blade.
-Check if there are any problems with the transmission components, such as belts, gears, etc., and repair or replace them as needed.
5. * * Excessive noise * *:
-Check the fixing condition of the cutting machine to ensure that there is no looseness or vibration.
-Check if the components are loose or worn, such as bearings, screws, etc., tighten or replace them.
6. * * Unstable cutting size * *:
-Reduce the feed speed to ensure stable and minimal placement of materials.
-Check if the countertop scraper and pressure pad are worn, and replace them if necessary.
7. * * Cutting products with uneven surface * *:
-Reduce the feed speed to ensure that the saw blade is sharp.
-Check if the cooling system is working properly, ensuring sufficient coolant and good heat dissipation.
When solving faults, it is important to pay attention to safety, ensure that the power is cut off, and follow operating procedures. At the same time, regular maintenance and upkeep of the cutting machine can effectively prevent malfunctions, improve equipment stability and processing efficiency. In addition, operators should have certain skills and experience to quickly diagnose and solve problems in the event of malfunctions.
For complex or unresolved faults, it is recommended to contact professional maintenance personnel for repair and maintenance. During the maintenance process, it may be necessary to replace components or adjust equipment parameters to restore the normal working state of the cutting machine.
