Français 
English 
العربية 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog Effectively cleaning the downward moving CNC bending machine is an important step to ensure its normal operation and extend its service life. Here are some suggestions to help you effectively clean this device:
1. * * Turn off power and prepare tools * *: Before starting cleaning, make sure to turn off the main power of the CNC bending machine and unplug the power plug of the machine head to ensure safety. Prepare the necessary cleaning tools, such as soft cloths, brushes, cleaning agents, and necessary protective equipment.
2. * * Clean the external surface * *: Gently wipe the external surface of the CNC bending machine with a soft cloth and specialized cleaning agent to remove metal shavings, dust, and oil stains. Ensure that the cleaning agent does not cause damage to the surface of the equipment and avoid using excessively damp cloths or water to directly flush the equipment.
3. * * Cleaning lubrication system * *: The lubrication system is an important part of the CNC bending machine and requires regular cleaning. Firstly, make a certain concentration of cleaning agent and pour it into the lubrication system. Then, by running the system for a period of time, the cleaning agent can fully function and remove dirt and impurities from the system. Finally, discharge the cleaning agent and replace it with new lubricating oil.
4. * * Cleaning conveyor belt * *: The conveyor belt is an important part of the CNC bending machine used for transporting materials and needs to be cleaned regularly. Use a brush to remove dust and debris from the conveyor belt, then rinse with clean water. Ensure that the conveyor belt is naturally dried before restarting the CNC bending machine.
5. * * Cleaning Electrical Components * *: For electrical components of CNC bending machines, such as control boxes, motors, etc., a dry air gun or hair dryer should be used for cleaning to remove dust and debris. Avoid using liquids or excessively damp cloths to wipe electrical components to prevent short circuits or damage.
During the cleaning process, please pay attention to the following points:
*Avoid using overly strong cleaning agents or solvents to prevent damage to the equipment.
*When cleaning, be gentle to avoid scratching or damaging the surface or components of the equipment.
*After cleaning, ensure that all components are dry and check for any missing components or areas that have not been cleaned.
By regularly cleaning the downward moving CNC bending machine, it is possible to maintain the cleanliness and normal operation of the equipment, extend its service life, and improve work efficiency. Please follow the cleaning guidelines and recommendations of the equipment manufacturer to ensure proper cleaning methods and safe operation.
