How does Manhart (Guangdong) CNC Machine Tool Co., Ltd. correctly use CNC bending machines?

The correct use of a CNC bending machine requires following the following steps and precautions:
Firstly, ensure that the workbench and working environment of the CNC bending machine are clean and tidy, free of debris and dust.
Next, set the parameters of the CNC bending machine. Turn on the power of the CNC bending machine and place the power switch in the “ON” position. Check if the power and communication lines of the CNC bending machine control system are normal. According to the process diagram and actual requirements, set the bending angle, bending length, bending depth and other parameters of the CNC bending machine.
Then, clamp the workpiece. Place the metal sheet to be processed on the workbench of the CNC bending machine, and use fixtures or fixtures to press the workpiece tightly to ensure its stable fixation on the workbench.
Next, adjust the mold. Select the appropriate bending mold according to the process requirements and replace it. Use an adjustment rod or handwheel to adjust the position and angle of the upper and lower molds, ensuring they match the workpiece.
Before starting the CNC bending machine, it is necessary to turn on the power and test the stroke to ensure its normal operation. Ensure that there is a gap in the thickness of the sheet metal when testing the upper mold to the bottom to avoid damage to the bending machine’s mold.
After starting the CNC bending machine, operate it through the control panel and input parameters such as bending angle and bending length. According to the processing requirements, press the corresponding operation button to complete the bending action of the CNC bending machine.
Throughout the entire operation process, safety precautions must be strictly followed. Wear personal protective equipment such as safety goggles, protective gloves, and non slip shoes to protect your eyes, hands, and feet. Keep the work area clean and avoid tripping or collision caused by debris and obstacles. Follow the correct operating procedures and do not arbitrarily change or omit any steps. Pay attention to the operation status of the equipment, and if any abnormal situation is found, stop the machine immediately for inspection. Do not approach the working area while the equipment is in operation to prevent accidental injury. It is prohibited to insert hands or other objects into the inside of the bending machine to avoid being pinched or hit.
Finally, in order to maintain the normal operation of the CNC bending machine and extend the service life of the equipment, regular maintenance and upkeep are required.
Please note that operating a CNC bending machine is a professional task that requires trained personnel to perform. If you are not familiar with the operation, it is recommended to seek professional assistance.