Machine-outil CNC Manhart À propos des machines de poinçonnage et de cisaillement CNC

CNC punching and shearing machine is an efficient and accurate punching and shearing equipment, with high automation, processing accuracy, and production efficiency. The following is the usage method of CNC punching and shearing machine:

1、 Preparation before operation:

1. Familiar with the structure and principle of CNC punching and shearing machines, and understand their relevant safety regulations.

Before operating the CNC punching and shearing machine, it is necessary to wear labor protection equipment, including protective goggles, earplugs, hats, gloves, etc.

3. Check whether the mechanical components of the CNC punching and shearing machine are intact, without looseness or detachment, and whether the electrical equipment is working properly.

Before operating the CNC punching and shearing machine, reasonable fixation and safety measures must be taken to ensure that it is in a stable state.

5. According to work requirements, place the workpiece on the punching and shearing machine workbench and ensure that it is firm and stable to avoid movement or falling of the workpiece.

2、 Operation steps:

During the operation, it is strictly prohibited to extend fingers, arms, and other body parts into the working area of the punching and shearing machine. If necessary, use specialized fixtures for operation.

During operation, it is prohibited to stand below, above, or on the side of the punching and shearing machine to prevent accidents.

During the operation, it is strictly prohibited to place tools, materials, etc. on the moving device of the punching and shearing machine to avoid interference or damage to the normal operation of the machine.

During the operation of the CNC punching and shearing machine, the operator should remain focused and not be distracted or participate in other activities.

5. During the operation, the working status of the machine should be monitored at all times. If there are any abnormal situations, the machine should be stopped immediately for inspection and handling.

During the punching and shearing process, it is necessary to ensure that there is sufficient clearance between the workpiece and the punching and shearing tool to avoid damage or injury caused by collision between the tool and the workpiece.

During the operation, if it is necessary to replace the punching and shearing tools or adjust the working parameters, it must be done with the machine stopped and ensure that there are no workpieces on the workbench.

When the operator leaves the CNC punching and shearing machine, they must first stop the machine and cut off the power to ensure that the machine is completely stopped.

9. After operating the CNC punching and shearing machine, the working area should be cleaned in a timely manner, debris and waste should be removed, and the surrounding area of the machine should be kept clean.

3、 Notes:

1. It is necessary to strictly follow the safety operating procedures and machine instructions to avoid safety accidents.
2. During use, it is necessary to regularly check whether all components of the equipment are working properly, including checking the lubrication of transmission components and the insulation of electrical components.
3. Before use, carefully check whether the size and shape of the workpiece meet the requirements to avoid equipment damage or decreased machining accuracy caused by workpiece problems.

For beginners, it is recommended to operate under the guidance of professional personnel and strictly follow the operating procedures.

5. During the operation, maintain a stable posture and position, avoid excessive force or rapid movement, to avoid affecting the machining accuracy and machine stability.
6. During the operation of the equipment, do not open protective doors or touch internal components to avoid danger.