Français 
English 
العربية 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog For adjusting the parameters of laser cutting machines with different materials and materials, key factors such as laser power, cutting speed, auxiliary gas pressure, and focusing mirror need to be considered. Here are some adjustment suggestions:
1. Laser power:
*Adjust the power according to the characteristics of the material. Different materials have different cutting parameters, and selecting the appropriate power can better adapt to different materials, improve cutting efficiency and quality.
*Adjust the power according to the cutting depth. Thicker materials require higher power to cut through, while thinner materials require lower power to avoid burning or melting.
2. Cutting speed:
*Choosing the appropriate speed can reduce the heat affected zone of the material, improve cutting quality and speed. Usually, thinner materials can use faster cutting speeds, while thicker materials require slower cutting speeds.
*Pay attention to the sparks generated during the cutting process. Sparks spreading from top to bottom indicate appropriate cutting speed; Spark tilting backwards indicates that the feed rate is too fast; Sparks appear non diffusive and few, coalescing together, indicating that the speed is too slow.
3. Auxiliary gas pressure:
*The magnitude of the auxiliary gas pressure will affect the cutting effect. Appropriate gas pressure can effectively remove the waste residue and heat generated during the cutting process, thereby improving cutting quality and speed.
*For thicker materials, higher auxiliary gas pressure may be required; For thinner materials, lower auxiliary gas pressure may be more appropriate.
4. Focusing mirror:
*The focusing mirror is a key component for laser beams to converge on the surface of the workpiece, and its adjustment directly affects the focal length and accuracy of cutting.
*When adjusting the focusing mirror, it is necessary to ensure that it is kept at an appropriate distance from the surface of the workpiece and kept clean to avoid affecting the cutting effect due to dust or dirt.
In summary, when adjusting the parameters of the laser cutting machine, it is necessary to make appropriate adjustments based on specific materials and materials. Through continuous experimentation and optimization, the most suitable parameter settings can be found to improve cutting efficiency and quality. Meanwhile, it is recommended to refer to the manufacturer’s recommended values of the laser cutting machine, as well as relevant technical documents and materials.
