Français 
English 
العربية 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog It is crucial to respond and handle accidents quickly during the operation of the cutting machine. Here are some suggested countermeasures:
**1 Immediately shut down the cutting machine * *:
*When an accident occurs, the cutting machine should be stopped as soon as possible. Manual shutdown can be achieved by pressing the stop button of the cutting machine or pulling down the power plug of the cutting machine. If the equipment supports it, the emergency stop button can also be pressed or the power can be cut off.
**2 Cut off power * *:
*Once the cutting machine stops running, it is necessary to immediately cut off the power supply of the cutting machine. This can avoid potential electrical hazards and reduce the risk of accidents.
**3 Assess injury situation and take emergency measures * *:
*Assess the injury situation of the operators based on the specific situation of the accident. If a mechanical tipping injury accident occurs, the machinery should be lifted or lifted off to avoid further injury to the injured.
*If a mechanical cutting injury accident occurs, effective measures such as hemostasis, shock prevention, wound dressing, and fixation should be taken depending on the situation. At the same time, it is important to preserve the severed organs or tissues to prevent infection and relieve pain.
*For accidents involving entanglement of belts, gears, and drums, personnel with knowledge of mechanical maintenance should be required to be present, and manual reverse rotation should be used to loosen the mechanical entanglement or to remove and cut individual mechanical components to quickly remove the injured from the source of harm.
**4 Emergency rescue and contact hospital * *:
*According to the severity of the injury, it is necessary to promptly contact nearby hospitals for rescue. During the waiting period for rescue, for severely injured individuals, they should be kept quiet, warm, lying flat, and moving less, and their lower limbs should be raised by about 20 degrees to continue hemostasis, bandaging, and fixation.
**5 Accident report and record * *:
*After an accident occurs, it is necessary to report to the higher authorities in a timely manner and record in detail the accident process, injury situation, emergency response measures, and other information. These pieces of information are crucial for subsequent accident investigations, root cause analysis, and the development of preventive measures.
**6 Cooperate with investigation and rectification * *:
*During the accident investigation, it is necessary to actively cooperate with relevant departments to conduct investigations, analyze the causes of the accident, and propose corresponding corrective measures. At the same time, according to the rectification requirements, timely repair and update the equipment, strengthen safety protection measures, and prevent similar accidents from happening again.
In short, when accidents occur during the operation of the cutting machine, one should remain calm and respond quickly, and take effective measures to reduce injuries and risks. At the same time, strengthening accident prevention and safety management, improving the safety awareness and operational skills of operators, are also important measures to prevent accidents from occurring.
