Manhart Operating Procedures for Twisted Shaft Up Bending Machine

**Operating Procedures for Twisted Shaft Up Bending Machine**
1、 Preparación antes de la operación
1. * * Check equipment * *: Before operating the bending machine on the torsion shaft, a comprehensive inspection of the equipment should be conducted, including power supply, air supply, lubrication system, fasteners, etc., to ensure that the equipment is in normal working condition.
2. * * Confirm Material * *: Check whether the specifications, dimensions, materials, and hardness of the material to be bent meet the equipment requirements, and select appropriate molds and parameters based on the characteristics of the material.
3. * * Cleaning the work area * *: Clean up the clutter in the work area to ensure cleanliness and avoid accidents during operation.
4. Wear protective equipment: Operators should wear protective equipment that meets the requirements, such as work clothes, safety shoes, gloves, goggles, etc.
2、 Safety precautions
1. * * Comply with safety regulations * *: Strictly follow the safety operating procedures of the equipment, and do not change or omit the operating steps without authorization.
2. * * Pay attention to power and gas sources * *: Before operation, ensure that the power and gas sources are correctly connected to avoid dangerous situations such as leakage or air leakage.
3. * * Overloading is prohibited * *: According to the rated bearing capacity of the equipment, overloading should be avoided to prevent damage to the equipment or safety accidents.
4. * * Pay attention to mold selection * *: Choose the appropriate mold based on the characteristics of the material to avoid using unsuitable molds that may cause equipment damage or a decrease in processing quality.
5. * * Prohibit unauthorized operations * *: Prohibit unauthorized operations during device operation, such as touching moving parts with hands, forcibly stopping the machine, etc.
3、 Operation steps
1. * * Start the device * *: Follow the device startup program to correctly start the twisting and bending machine.
2. * * Parameter Setting * *: Based on the characteristics of the material and processing requirements, correctly set the parameters of the equipment, such as bending force, bending angle, bending speed, etc.
3. * * Placement of Materials * *: Place the material to be bent on the workbench of the equipment and secure its position.
4. * * Start bending * *: Start the bending program and the equipment will automatically perform the bending operation.
5. Quality inspection: During the bending process, timely check the quality of the workpiece, such as bending angle, surface quality, etc., to ensure that the processing quality meets the requirements.
6. * * Shutdown * *: After completing the bending task, stop the machine correctly according to the equipment shutdown procedure, and turn off the power and gas sources.
4、 Emergency situation handling
1. * * Sudden shutdown * *: In case of sudden shutdown or other abnormal situations during equipment operation, the power and gas sources should be immediately cut off, and the equipment should be checked for any faults.
2. * * Safety accident * *: In the event of a safety accident, such as personnel injury, equipment damage, etc., the emergency plan should be immediately activated, emergency handling should be carried out, and relevant departments and personnel should be reported.
3. * * Troubleshooting * *: If the equipment malfunctions, it should be stopped immediately to check the cause of the malfunction and contact professional personnel for repair. Do not continue to use the equipment until the fault has been resolved.
5、 Maintenance and upkeep
1. * * Daily Cleaning * *: Regularly clean the equipment, keep it clean inside and outside, and avoid dust and debris from entering the interior of the equipment.
2. Lubrication and Maintenance: According to the lubrication requirements of the equipment, regularly lubricate and maintain the equipment to ensure that the moving parts of the equipment are in good lubrication condition.
3. * * Check fasteners * *: Regularly check whether the fasteners of the equipment are loose or damaged. If any are found, they should be tightened or replaced in a timely manner.
4. * * Regular Maintenance * *: Regularly repair and maintain the equipment according to its usage and maintenance cycle to ensure that its performance and accuracy meet the requirements.
This operating procedure is the basic operating procedure for the twisting axis bending machine, and operators should strictly follow and execute it. If necessary, supplements and modifications can be made according to the actual situation of the equipment.