Manhart How to ensure safe operation of an all electric roll bending machine?

Safety Guidelines for Operating All Electric Roll Bending Machines
1、 Introduction
As an important metal sheet metal processing equipment, the operation safety of the fully electric roll bending machine is crucial. This guide will elaborate in detail on how to ensure the safe operation of the fully electric roll bending machine from the aspects of equipment safety inspection, operator safety, operating procedures, equipment maintenance and repair, and safety precautions.
2、 Equipment safety inspection
Before using the fully electric roll bending machine, a comprehensive safety inspection should be carried out to ensure that all components of the equipment are intact and free from damage, deformation, and other phenomena.
2. Check the electrical system of the equipment, including motors, cables, switches, etc., to ensure that there are no exposed wires, short circuits, or other safety hazards.
3. Check the lubrication system of the equipment to ensure good lubrication and no oil leakage.
4. Check the emergency stop device, safety protection device, etc. of the equipment to ensure that they are intact, reliable, and effective.
3、 Operator safety
1. Operators must receive professional training, understand the operating procedures and safety knowledge of the equipment, and are strictly prohibited from operating without a certificate.
2. Operators should wear labor protection equipment that complies with regulations, such as safety helmets, protective goggles, gloves, etc.
3. Operators should maintain a good mental state and are strictly prohibited from operating equipment under the influence of alcohol or fatigue.
4. Operators should strictly follow the operating procedures and not change equipment parameters or engage in non-standard operations without authorization.
4、 Operation process
Before starting the equipment, ensure that there are no people or obstacles around the equipment to avoid accidents.
After starting the equipment, a no-load trial run should be carried out to check whether all components of the equipment are running normally.
When processing sheet metal, it is necessary to ensure that the size and material of the sheet metal meet the equipment requirements, and to avoid overloading or improper operation.
During the processing, close attention should be paid to the operating status of the equipment. If there are any abnormalities, the machine should be stopped immediately for inspection.
After the processing is completed, the equipment power should be turned off and debris and waste materials around the equipment should be cleaned.
5、 Equipment maintenance and repair
1. Regular maintenance and repair of equipment, including cleaning, lubrication, tightening, etc., to ensure that the equipment is in good working condition.
2. Regularly inspect the electrical and lubrication systems of the equipment, and promptly address any issues found.
3. Regularly test the emergency shutdown devices and safety protection devices of the equipment to ensure they are intact, reliable, and effective.
4. Maintenance and repair work should be carried out by professionals, and non professionals are strictly prohibited from dismantling or repairing equipment without authorization.
6、 Safety precautions
1. It is strictly prohibited to carry out cleaning, maintenance and other operations during the operation of the equipment to avoid accidents.
2. It is strictly prohibited to insert hands or other objects into the moving parts of the equipment to avoid accidents such as pinch injuries.
3. It is strictly prohibited to stack flammable, explosive and other hazardous materials around the equipment to prevent accidents such as fires.
4. It is strictly prohibited to leave the work position during the operation of the equipment to avoid being unable to handle accidents in a timely manner.
When the equipment is not in use for a long time, the power should be turned off and necessary protective measures should be taken to prevent moisture, damage, etc.
By implementing the above measures, the operational safety of the fully electric rolling bending machine can be ensured, the probability of accidents can be reduced, and the smooth progress of the production process can be guaranteed.