Manhart How to ensure that the parameters of the bending machine on the torsion shaft are adjusted correctly?

To ensure that the parameters of the bending machine on the torsion shaft are adjusted correctly, the following steps can be followed:
1、 Preliminary preparation
1. * * Understand the equipment * *: Firstly, it is necessary to have a detailed understanding of the technical parameters, performance characteristics, and operation manual of the twisting axis bending machine, clarify the adjustment range, accuracy requirements, and safety operating procedures of the equipment.
2. * * Check equipment status * *: Before adjusting parameters, ensure that the power and gas supply of the equipment are normal, and that the equipment is preheated to the optimal working state. At the same time, check whether each component of the equipment is in normal working condition, such as whether the lubrication system is in good condition, whether the mold is installed correctly, and whether the workbench is level.
2、 Parameter adjustment
1. * * Determine processing requirements * *: Determine appropriate processing parameters based on the material, thickness, size, and required bending angle of the processed workpiece.
2. * * Adjust the spindle and mold * *:
-If it is necessary to adjust the angle of the spindle, it can be achieved by replacing the fixture blade or the bending mold. Choose the appropriate blade or mold, and install and adjust it according to the equipment instructions.
-For adjusting the angle of the mold, you can loosen the fixing screws on the upper and lower parts of the mold, use an adjusting tool to move the mold horizontally or vertically until the desired angle is obtained, and tighten the fixing screws.
3. * * Set bending parameters * *:
-According to the requirements of the workpiece drawing, set the bending angle parameter on the operation interface of the equipment. Ensure that the parameter settings are correct to avoid excessive or insufficient parameter values that may cause the bending angle to exceed the requirements.
-Adjust parameters such as bending force and bending position based on the material and thickness characteristics of the workpiece. The values of these parameters will affect the accuracy and effectiveness of bending, and need to be adjusted according to the actual situation.
3、 Inspection and trial processing
1. * * Check parameter settings * *: After saving the parameters, check the set parameters to ensure they meet the actual processing requirements. You can check the correctness of parameter settings by previewing the bending process or simulating the bending operation.
2. * * Prototype Processing * *: Conduct prototype processing to verify whether the parameter adjustments of the equipment are correct. Observe whether the quality and bending angle of the trial processed workpiece meet the requirements. If there is any deviation, it needs to be adjusted.
4、 Precautions
1. Material considerations: When adjusting parameters, it is necessary to consider factors such as the hardness and elastic modulus of the material to ensure that the bending degree meets the requirements.
2. * * Safe operation * *: During the adjustment process, carefully observe the operation of the machine, and if there are any abnormal situations, stop the machine for inspection in a timely manner. Follow the instructions and operating procedures of the equipment to ensure safe operation.
By following the above steps, it can be ensured that the parameters of the twisting axis bending machine are adjusted correctly, thereby achieving high-quality bending processing results.