Manhart How to operate CNC punching machines safely

**Safety operation guide for CNC punching machines**
1、 Operation preparation
1. Operators must undergo professional training and hold corresponding operation certificates, familiar with the performance, structure, operating procedures, and safety precautions of CNC punching machines.
Before operation, the working environment of the CNC punching machine should be checked for safety and cleanliness, to avoid debris and obstacles affecting the normal operation of the equipment.
3. Check if the power supply, air supply, lubrication system, etc. are in normal condition to ensure that the equipment can work stably.
4. Check whether the workpiece meets the processing requirements, including material, size, accuracy, etc., to avoid equipment failure or safety accidents caused by workpiece problems.
2、 Normas de funcionamiento
1. Strictly follow the equipment operating procedures, process according to the prescribed operating procedures, and do not change equipment parameters or engage in illegal operations without authorization.
During the operation of the equipment, operators should concentrate their attention, closely monitor the equipment’s operating status, and promptly detect and handle abnormal situations.
3. It is prohibited to leave the post during the operation of the equipment. If you need to leave, you must stop the machine and cut off the power.
4. It is prohibited to directly touch moving parts with hands or other tools to avoid injury accidents.
3、 Safety facilities
1. The equipment should be equipped with complete safety protection devices, such as protective covers, safety doors, etc., to ensure the personal safety of operators.
2. The emergency stop switch of the equipment should be set in a position that is easy for the operator to reach. In case of an emergency, the operator can immediately press the emergency stop switch to stop the equipment from running.
3. The equipment should be equipped with an alarm device, which can promptly sound an alarm when abnormal situations occur, reminding operators to take corresponding measures.
4、 Maintenance and upkeep
1. Regularly maintain the equipment, check the wear of each component, and replace severely worn parts in a timely manner.
2. Clean the surface of the equipment from oil stains, dust and other debris, keep the equipment clean, and improve the operational efficiency of the equipment.
3. Regularly inspect and replace the lubrication system with lubricating oil to ensure good lubrication of the equipment and reduce the occurrence of wear and failure.
4. Maintenance work should be carried out by professionals, and non professionals are not allowed to dismantle or repair equipment without authorization.
5、 Emergency response
During the operation of the equipment, in case of emergency situations such as fire or leakage, the operator should immediately press the emergency stop switch, cut off the power and gas sources, and take corresponding fire extinguishing and emergency measures.
If a personal injury accident occurs, the operator should immediately stop the machine, cut off the power and gas sources, and call the emergency hotline in a timely manner to treat the injured.
When dealing with emergency situations, one should remain calm and composed, operate according to the emergency plan, and ensure the safety of personnel and equipment.
6、 Operation ended
After processing, the waste and debris around the equipment should be cleaned up to maintain a clean and tidy environment.
2. Turn off the power and air supply of the device to ensure that it is in a safe state.
3. Inspect the equipment, promptly record any issues found, and notify professional personnel for handling.
4. Fill out the equipment operation record form, record the operation status of the equipment and any issues encountered during the operation process.
By strictly following the above safety operation guidelines, the safe and stable operation of the CNC punching machine can be ensured, ensuring the personal safety of operators and the integrity of equipment.