Manhart How to extend the service life of the hydraulic system of the oil electric servo pump controlled bending machine through operation and maintenance?

In order to extend the service life of the hydraulic system of the oil electric servo pump controlled bending machine through operation and maintenance, the following steps and key points can be followed:
1、 Operation precautions
1. * * Standardized operation * *:
-Operators should receive professional training and be familiar with equipment operating procedures and precautions.
-Strictly follow the operation manual to operate the equipment and avoid improper operations such as overloading, speeding, and out of range use.
2. * * Pay attention to monitoring * *:
-During the operation of the equipment, key parameters such as pressure, temperature, and flow rate of the hydraulic system should be monitored in real-time.
-When abnormal situations are found, the machine should be immediately shut down for inspection to avoid equipment running with defects.
3. * * Safe operation * *:
-Follow the safety operating procedures of the equipment to ensure that no safety accidents occur during its operation.
-When carrying out maintenance or repair work, ensure that the equipment has been shut down and cut off the power supply.
2、 Maintenance measures
1. * * Hydraulic system maintenance * *:
-Regularly clean the hydraulic system, remove oil and impurities, and keep the system clean.
-Check and replace the filters in the system to ensure that the oil is clean and free of impurities.
-Regularly check the integrity of hydraulic pipelines, joints, seals, etc. to prevent leakage.
-Regularly check the quality of hydraulic oil, such as color, viscosity, cleanliness, etc., and replace unqualified hydraulic oil in a timely manner.
2. * * Oil Management * *:
-Use hydraulic oil that meets equipment requirements and avoid using inferior or unqualified oil products.
-Regularly replace hydraulic oil, and determine the replacement cycle based on equipment usage, generally ranging from 6 months to 1 year.
-When replacing hydraulic oil, the filter should be cleaned and replaced with a new filter element.
3. * * Electrical system inspection * *:
-Regularly check if the power lines, electrical components, etc. are intact and free from damage, short circuits, and other phenomena.
-Regularly check the updates of the control system software to ensure that the latest version is being used.
-Equipment working in harsh environments should increase the frequency of electrical component inspections to ensure stable operation of the electrical system.
4. * * Seal Inspection * *:
-Regularly inspect the sealing components of hydraulic cylinders, pipelines, etc. to ensure they are intact and free from damage, aging, and other phenomena.
-If the seal is damaged or aged, it should be replaced in a timely manner to avoid leakage.
5. * * Mechanical component maintenance * *:
-Regularly check whether the movement of hydraulic cylinders, pumps, motors and other components is flexible and free from jamming.
-Check whether all connectors and fasteners are securely fastened to avoid leaks and malfunctions caused by looseness.
-Regularly lubricate and clean mechanical components to maintain their good working condition.
3、 Summary
By implementing the above operation and maintenance measures, it is possible to effectively prevent the occurrence of hydraulic system failures in the oil electric servo pump controlled bending machine, and extend the service life of the hydraulic system. At the same time, these measures can also improve the operational efficiency and stability of equipment, reduce maintenance costs, and bring greater economic benefits to enterprises.