How to avoid common faults when using high-precision oil electric servo CNC bending machines?

When using high-precision oil electric servo CNC bending machines, in order to avoid common faults, attention and operation can be paid to the following aspects:
Firstly, ensure the stability of the hydraulic system. Regularly check the cleanliness and oil level of hydraulic oil to avoid mixing impurities and air. The selection of hydraulic oil is also crucial, ensuring that it meets the requirements of the machine and avoiding the use of contaminated or deteriorated hydraulic oil. At the same time, pay attention to the sealing of the hydraulic system to prevent leakage and unstable oil pressure.
Secondly, * * correctly operate and maintain the electrical system * *. Ensure stable electrical connections and avoid looseness or short circuits. Regularly check the working status of electrical components, such as sensors, switches, and motors, and promptly replace or repair any abnormalities found. In addition, avoid using the machine in damp or high temperature environments to reduce the risk of electrical failures.
Furthermore, * * maintain lubrication and cleanliness of mechanical components * *. Regularly lubricate key components such as bearings and guide rails to reduce friction and wear. At the same time, keep the inside and outside of the machine clean to avoid damage caused by impurities such as metal shavings and dust.
In addition, * * follow operating procedures and precautions * *. When operating the machine, it is essential to follow the operating manual and procedures to avoid malfunctions caused by improper operation. For example, before starting the machine, check that all components are in the correct position to ensure that safety protection devices are effective. During the processing, avoid exceeding the rated load and processing range of the machine to avoid overloading or damage to the machine.
Finally, perform regular maintenance and upkeep. Develop a reasonable maintenance and upkeep plan based on the usage of the machine and the requirements of the maintenance manual. Regularly conduct a comprehensive inspection and maintenance of the machine, replace severely worn parts in a timely manner, and ensure that the machine is in good working condition.
In summary, to avoid common faults in high-precision oil electric servo CNC bending machines, it is necessary to start from multiple aspects, including ensuring the stability of the hydraulic system, correct operation and maintenance of the electrical system, maintaining lubrication and cleanliness of mechanical components, following operating procedures and precautions, and regular maintenance and upkeep. By implementing these measures, the reliability and stability of the machine can be significantly improved, and its service life can be extended.