Español de Venezuela 
English 
العربية 
Français 
Русский 
简体中文 
Tiếng Việt 
Español 
Tagalog Ensuring safety is crucial when installing and using a fully electric servo CNC rolling machine. Here are some key steps and measures to ensure safety during installation and use:
1、 Safety measures during the installation phase:
1. * * Choose a suitable location * *: The rolling machine should be installed on a flat and solid ground to ensure the stability of the equipment. At the same time, installation should be avoided in damp, dusty, or corrosive gas environments.
2. * * Ensure power supply safety * *: When installing electrical equipment, relevant electrical safety standards must be followed. Use qualified cables and plugs, and ensure that the power cord is firmly connected and not loose.
3. * * Conduct safety inspection * *: After installation is completed, a comprehensive safety inspection should be conducted, including mechanical and electrical components. Ensure that all components are installed correctly, securely, and without damage or defects.
2、 Security measures during the usage phase:
1. * * Follow operating procedures * *: Before using the rolling machine, operators must receive professional training and be familiar with the operating procedures of the equipment. Strictly follow the procedures to avoid safety accidents caused by illegal operations.
2. * * Wear personal protective equipment * *: When using the rolling machine, operators should wear personal protective equipment that complies with regulations, such as safety helmets, protective goggles, earplugs, protective gloves, etc. These equipment can effectively reduce or avoid potential injuries during operation.
3. * * Regular Inspection and Maintenance * *: Regularly inspect and maintain the rolling machine, including mechanical and electrical components. Timely repair or replace components when problems are found, ensuring the normal operation and safety performance of the equipment.
4. * * Pay attention to the surrounding environment * *: When using the rolling machine, attention should be paid to the safety of the surrounding environment. Keep the work area clean and free of debris to avoid interference with the normal operation of equipment or safety accidents caused by debris.
5. Emergency shutdown measures: In case of emergency or abnormality during equipment operation, the operator should immediately press the emergency shutdown button, cut off the power, and stop the equipment from running. Meanwhile, it should be promptly reported to relevant personnel for handling.
In short, safety issues must always be taken into consideration when installing and using fully electric servo CNC rolling machines. By following relevant safety standards and regulations, selecting appropriate locations, conducting safety inspections and maintenance, and wearing personal protective equipment, measures can be taken to ensure the safe operation of equipment and the personal safety of operators.
