Español de Venezuela 
English 
العربية 
Français 
Русский 
简体中文 
Tiếng Việt 
Español 
Tagalog High temperature welding machines are mainly used for welding high-temperature materials, such as stainless steel, alloy steel, etc. Special attention should be paid to safety issues during use to ensure the safety of operators and the stable operation of equipment. The following are general usage steps and precautions:
1. Preparation stage:
*Check the equipment: Ensure that the appearance of the welding machine is intact, without damage or deformation. Check if the power cord and grounding wire are intact and there are no exposed or damaged parts.
*Environmental assessment: Ensure that the working environment is well ventilated and away from flammable and explosive materials. When using in high temperature or humid environments, special attention should be paid to the safety and performance of the equipment.
*Choose appropriate welding materials and wires: Select the appropriate welding materials and wires based on the type and thickness of the material to be welded.
2. Operation phase:
*Connect the power supply: Connect the welding machine correctly to the power supply, ensuring that the voltage and current meet the equipment requirements.
*Set parameters: Based on the type and thickness of the material to be welded, set appropriate parameters such as welding current, voltage, and welding speed.
*Arc welding: Align the welding gun with the position to be welded, gently press the arc button on the welding gun to make the welding wire contact the workpiece and generate an arc. Maintain stable welding speed and angle for continuous welding.
*Closing work: After completing the welding, move the welding gun away from the workpiece and press the stop button on the welding machine to cut off the power.
3. Precautions:
*Safety protection: During operation, it is necessary to wear personal protective equipment such as protective goggles, gloves, and protective clothing. Avoid direct contact with high-temperature welding areas to prevent burns or splashes from injuring people.
*Equipment maintenance: Regularly clean and maintain the welding machine to ensure its normal operation and extend its service life.
*Fault handling: In case of equipment malfunction or abnormal situation, the operation should be stopped immediately and professional personnel should be contacted for maintenance and repair in a timely manner.
The above content is for reference only. It is recommended to carefully read the equipment manual before using the high-temperature welding machine to ensure that operators are familiar with the operating procedures and safety precautions of the equipment. If there are any questions or difficulties in actual operation, it is recommended to consult professional personnel or manufacturer technical support.