How does Manhart (Guangdong) CNC Machine Tool Co., Ltd. clean the lenses of laser cutting machines?

When cleaning the lenses of the laser cutting machine, special care needs to be taken to avoid any damage to the lenses. Here are some steps and precautions for cleaning lenses:
1. * * Preparation Tools * *: Prepare necessary tools, including cleaning paper, lint free cloth, acetone or high-purity alcohol, and laboratory grade paper soft cotton balls.
2. * * Preliminary cleaning * *: First, gently blow off the dust and particles on the surface of the lens with a blowing balloon, ensuring that there are no large impurities on the surface of the lens.
3. * * Moisturizing lenses * *: Dip a soft cotton ball in an appropriate amount of acetone or high-purity alcohol to ensure that the cotton ball does not drip, but remains slightly wet.
4. * * Wipe the lens * *: Starting from the center of the lens, gently rotate and wipe to the edge. Pay attention to even force and avoid excessive force or scratches on the lens. If necessary, wipe repeatedly until the lenses are clean.
5. * * Dry Lens * *: Gently wipe the lens dry with a dry, lint free cloth to ensure that there is no residual liquid or cotton fiber on the surface of the lens.
During the cleaning process, please pay attention to the following points:
*Avoid using sharp tools or rough fabrics to avoid scratching the lenses.
*Do not use water or other unknown liquids to clean the lenses, as moisture may cause damage or deformation to the lenses.
*Do not speak to the lenses and keep potential pollutants such as food and beverages away from the work environment to prevent contamination of the lenses.
*When cleaning lenses, the working area should be kept clean to prevent dust and impurities from falling onto the lenses again.
Please note that different types of lenses may have different cleaning requirements, so it is best to refer to the equipment manual or consult the manufacturer for specific cleaning recommendations before cleaning.
Finally, it is recommended to regularly inspect and clean the lenses of the laser cutting machine to ensure the normal operation of the equipment and cutting quality. If damage or inability to clean the lenses is found, professional maintenance personnel should be contacted in a timely manner for replacement or repair.