Tips for using the three roll rolling machine of Manhart (Guangdong) CNC Machine Tool Co., Ltd

**Tips for using the Three Kun Rolling Round Machine**
**1、 Equipment startup and inspection**
1. Before starting the three roller rolling machine, ensure that the power connection is stable and the voltage meets the equipment requirements.
2. Check whether all components of the equipment are intact and undamaged, especially key parts such as rollers, bearings, and gears.
3. Turn on the device power, start the main motor, and observe whether the device is running normally, and whether there are any abnormal sounds or vibrations.
4. Check the lubrication system to ensure that the oil level is normal and the oil circuit is unobstructed.
**2、 Material selection and placement**
1. Select appropriate metal profiles according to production needs to ensure material quality meets process requirements.
2. Place the metal profile in the working area of the equipment, paying attention to maintaining the flatness and stability of the material.
3. Adjust the spacing and clamping force of the rollers appropriately based on the hardness and thickness of the material.
**3、 Adjustment of rolling parameters**
1. Adjust the parameters of the rounding machine according to the material specifications and the required roundness, including the speed of the rollers, feed rate, etc.
When adjusting parameters, follow the instructions in the equipment operation manual to avoid blind operation that may cause equipment damage or substandard workpiece quality.
**4、 Monitoring during operation**
1. During the rolling process, closely monitor the operating status of the equipment and the quality changes of the workpiece.
If any equipment abnormalities or substandard workpiece quality are found, the machine should be immediately shut down for inspection, the cause should be identified, and measures should be taken to solve the problem.
**5、 Common faults and troubleshooting**
1. Common faults that may occur during equipment operation include motor failure, bearing overheating, oil circuit blockage, etc.
2. For these faults, corresponding troubleshooting and emergency plans should be established to ensure that they can be quickly resolved when they occur.
**6、 Maintenance and upkeep**
1. Regularly clean the equipment, remove oil and dust, and keep the appearance of the equipment clean.
2. Regularly inspect the lubrication system of the equipment to ensure that the oil level is normal and the oil circuit is unobstructed.
3. Regularly inspect and replace vulnerable parts of the equipment to ensure its normal operation.
**7、 Safety operating procedures**
1. During the operation process, strictly follow the safety operating procedures and prohibit unlicensed or irregular operations.
During the operation of the equipment, it is prohibited to touch the rotating parts of the equipment or perform other dangerous operations.
If any abnormalities or safety hazards are found in the equipment, it should be immediately shut down and reported to relevant personnel for handling.
**8、 Organizing after completing homework**
After completing the homework, the equipment power should be turned off in a timely manner, and debris and waste around the equipment should be cleaned up.
2. Conduct a comprehensive inspection and maintenance of the equipment to ensure that it is in good working condition.
3. Keep homework records and analyze data to provide reference and basis for the next assignment.