استخدام آلات اللكم والقص من قبل شركة Manhart (Guangdong) CNC Machine Tool Co., Ltd

**Guidelines for using punching and shearing machines**

**1、 Introduction**

Punching and shearing machine is a widely used equipment in the metal processing industry, mainly used for cutting various metal sheets. Its working principle is to cut the metal sheet according to the preset size and shape through high-speed impact and shear force. Punching and shearing machines have the advantages of simple operation, high efficiency, and high accuracy, and are one of the indispensable equipment in the modern metal processing industry.

**2、 Preparation before use**

1. * * Check the equipment * *: Ensure that the punching and shearing machine is in good working condition, without any faults or damage. Special attention should be paid to checking whether the cutting blade is sharp and firmly fixed.

2. * * Choose the appropriate blade * *: Select the appropriate cutting blade based on the type, thickness, and hardness of the metal sheet to be cut.

3. * * Set working parameters * *: Set the cutting speed, feed rate, and other parameters of the punching and shearing machine according to the processing requirements.

4. * * Safety protection measures * *: Ensure that the operating area is clean and free of debris; Wear personal protective equipment such as safety glasses and gloves that meet safety standards.

**3、 Operation steps**

1. * * Start the equipment * *: Start the punching and shearing machine correctly according to the requirements of the equipment manual.

2. * * Placement of Metal Sheet * *: Place the metal sheet to be cut on the workbench of the punching and shearing machine to ensure accurate positioning and firm fixation of the sheet.

3. * * Start Cutting * *: Start the cutting program of the punching and shearing machine, and adjust the cutting size and shape through the control panel.

4. * * Monitoring the cutting process * *: During the cutting process, close attention should be paid to the cutting situation to ensure cutting quality.

5. * * End cutting * *: After completing the cutting, shut down the punching and shearing machine correctly according to the requirements of the equipment manual.

**4、 Precautions**

1. * * Safety First * *: During the operation, always follow the safety operating procedures to ensure personal and equipment safety.

2. Regular Maintenance: Regular maintenance and upkeep of the shearing machine to ensure that the equipment is in good working condition.

3. * * Correct operation * *: Strictly follow the requirements of the equipment manual and operation manual to avoid safety accidents and equipment damage caused by misoperation.

**5、 Troubleshooting and Handling**

1. * * Common faults * *: such as equipment failure to start, poor cutting quality, blade wear, etc.

2. * * Troubleshooting method * *: Check the power supply, blades, working parameters, etc., and identify the cause of the malfunction.

3. * * Handling Measures * *: Take corresponding measures based on the cause of the malfunction, such as replacing blades, adjusting working parameters, etc.

**6、 Conclusion**

Through the introduction in this article, I believe you have gained a deeper understanding of the use of punching and shearing machines. During use, please be sure to follow safety operating procedures, operate and maintain equipment correctly, and ensure processing quality and personal safety. Meanwhile, we also recommend that you regularly maintain and upkeep the shearing machine to extend its service life.

If you encounter any problems during use, please feel free to contact our technical support team at any time, and we will be happy to serve you.

(Note: This article is only for reference as a guide for the use of punching and shearing machines. Please follow the equipment manual and actual situation for specific operations.)