Operating instructions for the rolling machine of Manhart (Guangdong) CNC Machine Tool Co., Ltd

**Operating instructions for the rolling machine**
1. فحص المعدات وإعدادها
1. Check if the appearance of the rolling machine is intact and there is no obvious damage or deformation.
2. Confirm that the power connection is normal, the voltage is stable, and ensure good grounding.
3. Check the lubrication system of the rolling machine to ensure that all lubrication points are well lubricated.
4. Check if the control system of the rolling machine, including instruments, buttons, sensors, etc., is working properly.
5. Ensure that safety protection devices are intact and effective, such as protective covers, emergency stop buttons, etc.
2、 Material selection and placement
1. Select suitable boards according to production needs, ensuring that their material, thickness, width and other parameters meet the requirements of the rolling machine.
2. Place the board on the workbench of the rolling machine and ensure its position is accurate and stable.
3、 Adjusting the parameters of the rolling plate
1. Adjust the parameters of the rolling machine, such as rolling speed, rolling force, etc., based on the material, thickness, and required bending angle of the board.
2. Ensure that the adjusted parameters are within the rated range of the rolling machine and avoid overloading operation.
4、 Start rolling operation
1. Start the rolling machine and wait for it to run smoothly before starting the rolling operation.
During the operation, adjust the rolling parameters according to the actual situation of the board in a timely manner to ensure the quality of the rolling.
5、 Monitoring the rolling process
During the rolling process, it is important to closely monitor the curling of the board to ensure that it proceeds as expected.
If any abnormal situations are found, such as board breakage or abnormal rolling speed, the machine should be stopped immediately for inspection.
6. معالجة الاستثناءات والإغلاق
If any abnormal situation occurs during the rolling process, the emergency stop button should be immediately pressed to stop the machine for inspection.
2. Check the causes of abnormalities, such as equipment malfunctions, material issues, etc., and take corresponding measures in a timely manner for handling.
3. After processing, recheck the equipment to ensure that there are no abnormal situations before continuing with the operation.
7、 Equipment maintenance and upkeep
1. Regularly clean the rolling machine, remove dust and debris, and keep the equipment tidy.
2. Regularly lubricate the lubrication system of the rolling machine to ensure smooth operation of all components.
3. Regularly inspect the fasteners of the equipment, and tighten them in a timely manner if there is any looseness.
4. Regularly inspect the electrical system of the equipment to ensure its normal operation.
8、 Safety precautions
When operating the rolling machine, safety protective equipment such as protective goggles, gloves, etc. should be worn.
2. It is prohibited to carry out maintenance or adjustment work while the equipment is in operation.
If any abnormalities or malfunctions are found in the equipment, it should be immediately shut down and professional personnel should be notified for maintenance.
4. During the operation, it is important to maintain focus and avoid fatigue or distractions that may lead to safety accidents.
Please make sure to follow the above operating instructions and safety precautions to ensure the normal operation and production safety of the rolling machine.