Mannhart (Guangdong) CNC Machine Tool Co., Ltd. Oil Electric Servo CNC Bending Machine Usage

Usage of oil electric servo CNC bending machine
1、 Equipment Introduction
Oil electric servo CNC bending machine is a modern sheet metal processing equipment that integrates mechanical, hydraulic, electrical, and CNC technology. This equipment adopts an oil electric servo system, which has the characteristics of high precision, high efficiency, and high stability. It is widely used in the bending processing of sheet metal parts in the fields of automobiles, household appliances, construction, ships, etc.
2、 Safety precautions
1. Operators should be familiar with equipment structure, performance, and operating methods, and follow operating procedures.
Before starting up, check whether all parts of the equipment are normal, especially the electrical system, hydraulic system, CNC system, etc.
3. It is strictly prohibited to touch moving parts during equipment operation to avoid danger.
When replacing molds or adjusting equipment, ensure that the equipment has been completely shut down and take safety measures.
3、 Operation steps
1. Preparation for startup
(1) Connect the power and turn on the device power switch.
(2) Check if the oil level is appropriate. If hydraulic oil needs to be replenished, please use specialized oil.
(3) Check if the air pressure is normal. If the air pressure is insufficient, please adjust or replace the air source in a timely manner.
(4) Open the CNC system and check if the software is running properly.
2. Mold installation and adjustment
(1) Select appropriate upper and lower molds according to the requirements of the workpiece and install them on the equipment.
(2) Adjust the mold gap to ensure that it meets the bending requirements of the workpiece.
(3) Use the centering device to adjust the position of the workpiece in the mold, ensuring bending accuracy.
3. Programming and parameter settings
(1) According to the requirements of the workpiece drawing, input the bending program into the CNC system.
(2) Set parameters such as bending speed and pressure to ensure bending quality.
(3) Simulate the operation and check if the program and parameter settings are correct.
(1) Place the workpiece on the mold and secure it with a positioning device.
(2) Start the bending program, and the equipment will automatically complete the bending process.
(3) During the processing, operators should closely monitor the operating status of the equipment. If there are any abnormalities, they should stop the machine for inspection in a timely manner.
5. Processing completion and equipment maintenance
(1) After processing is completed, turn off the CNC system and equipment power switch.
(2) Clean the oil and debris on the surface of the equipment and molds, and keep the equipment clean.
(3) Regularly check the tightness of each component of the equipment, and if there is any looseness, it should be tightened in a timely manner.
(4) Regularly replace hydraulic oil and filters to ensure the normal operation of the hydraulic system.
(5) Maintain and upgrade the CNC system regularly to ensure the stability and progressiveness of the software.
4、 Precautions
When using the oil electric servo CNC bending machine, it is necessary to follow the safety operating procedures and not change the equipment parameters and programs arbitrarily.
Before bending, carefully check whether the workpiece size, material, etc. meet the requirements to avoid damage to the equipment.