How to check if the equipment is completely dry after cleaning the oil electric servo CNC bending machine by Manhart (Guangdong) CNC Machine Tool Co., Ltd?

After cleaning the oil electric servo CNC bending machine, it is crucial to ensure that the equipment is completely dry, as residual moisture may cause electrical failure, corrosion, or damage to critical components. Here are some suggestions for checking if the equipment is completely dry:
1. Visual inspection: Firstly, visually inspect the external and accessible internal parts of the equipment. Pay special attention to areas such as electrical components, wiring terminals, hydraulic components, and lubrication systems to see if there are any water droplets, water marks, or wet parts.
2. * * Touch Check * *: Gently touch various parts of the device, especially those areas that may hide moisture, while ensuring safety. Pay attention to checking for any unusual cold spots or moisture, as this may indicate residual moisture.
3. * * Use desiccant * *: In certain areas of the equipment, especially electrical components and wiring areas, some desiccants (such as silicone bags) can be placed. These desiccants can absorb any remaining moisture, ensuring that these areas remain dry.
4. Inspection before power on test: Before reconnecting the power, carefully inspect the interior and exterior of the equipment again to ensure that there are no water droplets or other signs of moisture. Pay special attention to the electrical connections to avoid any risk of short circuits or damage.
5. * * Use testing equipment * *: If conditions permit, humidity meters and other testing equipment can be used to check the humidity level inside the equipment. This can provide more accurate data to evaluate the dryness of the equipment.
6. * * Run Test * *: After confirming that the device is dry, reconnect the power and gradually start the device according to the operating instructions. During the initial operation phase, closely monitor the operation status of the equipment to ensure that there are no abnormalities caused by residual moisture.
Please note that the drying process may take some time, especially for large or complex equipment. Patience and attention to detail are crucial during the cleaning and drying process. In addition, to ensure operational safety and equipment stability, it is recommended to follow the cleaning and drying guidelines provided by the equipment manufacturer.