How to adjust the spacing of Manhart (Guangdong) CNC Machine Tool Co., Ltd.’s fully electric servo CNC rolling machine?

The spacing adjustment of the fully electric servo CNC rolling machine mainly involves adjusting the roller axis spacing of the rolling machine to adapt to different widths and thicknesses of sheets. The specific adjustment steps are as follows:
1. Preparation stage: First, ensure that the device is powered on and the controller is in working condition. At the same time, clean the working platform and auxiliary equipment of the rolling machine to prepare for adjusting the spacing.
2. * * Enter Adjustment Program * *: Open the controller and enter the corresponding adjustment program. This usually involves selecting “spacing adjustment” or similar options.
3. * * Input Parameters * *: Enter the corresponding parameters based on the width and thickness of the sheet to be processed. These parameters will be used to calculate the ideal spacing between the roller shafts.
4. * * Adjust roller shaft position * *: Based on the input parameters, the controller will automatically calculate and adjust the position of the roller shaft. In some cases, it may also be necessary to manually adjust the position of the roller shaft to ensure precise spacing.
5. * * Verification Adjustment * *: After the adjustment is completed, a known width and thickness board should be used for verification. Place the sheet metal into the rolling machine and observe whether it can pass smoothly, and whether the spacing between the roller shafts is appropriate.
6. * * Fine adjustment and repetition * *: If the spacing is found to be inappropriate during the verification process, fine adjustment should be made and the above steps should be repeated until the satisfactory spacing is achieved.
7. * * Save Settings * *: After completing the adjustments, remember to save the settings so that they can be directly called up next time you use them.
Please note that the above steps may vary depending on different device models and controllers. Therefore, before adjusting the spacing, it is best to consult the equipment’s operating manual or contact the equipment manufacturer for accurate guidance. Meanwhile, during the adjustment process, it is necessary to pay attention to safety, follow the safety operating procedures of the equipment, and ensure personal safety and normal operation of the equipment.