كيف تضمن شركة مانهارت (قوانغدونغ) سي إن سي لآلات الأدوات المحدودة سلامة آلة الانحناء أثناء الاستخدام لتجنب المخاطر الأمنية الناجمة عن الضوضاء؟

To ensure the safety of the bending machine during use and avoid safety hazards caused by noise, the following measures can be taken:

1. Ensure that the power and air sources of the bending machine are well grounded, the electrical components are intact, and the electrical wiring is not loose. This helps to reduce the risk of electrical faults and electric shock.

2. Check if the lubrication system is working properly and if the lubricating oil is sufficient. Maintaining a good lubrication system can help reduce machine wear and noise generation.

3. Ensure that the required materials meet the requirements of the machine and are not too long, too wide, or too thick. This helps to prevent accidental movement or jamming of materials during the bending process, which can lead to safety accidents.

4. Wear personal protective equipment, including safety helmets, protective goggles, earplugs, gloves, etc. This helps to reduce the harm of noise to operators and provides necessary protection.

5. Strictly abide by the operating procedures of the machine, follow relevant safety signs and warning instructions. Personnel who do not meet the operator’s qualifications are prohibited from operating the machine. This helps to ensure that operators understand and follow the correct operating methods, reducing the risk of accidents.

During the bending process, do not approach or extend your hands, head, body, or other parts into the working area of the bending machine. Operators should remain focused and calm, ensuring that they are not disturbed by other things during operation. This helps to prevent accidental injuries from occurring.

When adjusting the height of the workbench, it is necessary to stop the machine and cut off the power. It is strictly prohibited to make adjustments while the machine is running. This helps to prevent accidental machine start-up or other malfunctions, thereby ensuring the safety of operators.

8. Install soundproof walls or barriers around the equipment to reduce the spread and interference of noise. Reasonably arrange the work area of equipment and operators, ensure that operators are away from noise sources, and reduce the impact of noise on them.

In summary, by ensuring the good condition of the equipment, following operating procedures, wearing personal protective equipment, and adjusting the layout of the work area reasonably, measures can be taken to ensure the safety of the bending machine during use and avoid safety hazards caused by noise. At the same time, it is necessary to regularly maintain and upkeep the bending machine to ensure its normal operation and reduce the generation of noise.