العربية 
English 
Français 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog How to operate and maintain the mechanical electric rolling machine correctly
==================
**1、 Read the operation manual**
Before operating the mechanical electric rolling machine, be sure to read the operating manual carefully. The manual contains important content such as basic information, operating steps, and safety precautions of the equipment, which helps users become familiar with the equipment and ensure the correctness and safety of operation.
**2、 Check the power supply and grounding**
Before operating the equipment, it is necessary to check whether the power cord and grounding are intact. Ensure that the power plug is firmly inserted and the grounding wire is reliably connected to prevent electrical faults or electric shock accidents.
**3、 Equipment appearance inspection**
Before carrying out the operation, a comprehensive inspection of the appearance of the equipment should be carried out, including whether there is any damage, deformation, rust or other phenomena on the equipment. If there are any abnormal situations, the machine should be shut down in a timely manner and professional personnel should be contacted for maintenance.
**4、 Lubricating components and screws**
Regularly lubricate the lubrication components of the equipment to ensure smooth operation during operation. At the same time, check if the screws on the equipment are tight. If there is any looseness, tighten them in a timely manner to prevent equipment failure during operation.
**5、 Start up and trial operation**
After ensuring the completion of the above inspection work, the equipment can be started for trial operation. During the trial operation, attention should be paid to observing the operation of the equipment. If there are any abnormalities, the machine should be stopped and checked in a timely manner.
**6、 Sheet placement and alignment**
When operating the equipment, the sheet should be placed in the designated position of the equipment and ensure that the sheet is aligned with the equipment. Improper placement or alignment of the board may lead to equipment malfunctions or affect processing efficiency during operation.
**7、 Curling speed and force**
When curling the board, the curling speed and force should be adjusted appropriately based on the material, thickness, and required bending angle of the board. Excessive speed or force may cause equipment overload or damage.
**8、 Shutdown and power outage**
After completing the operation, the equipment should be turned off in the correct order and the power should be disconnected. It is prohibited to directly unplug and unplug the power plug or perform other dangerous operations during the operation of the equipment.
**9、 Regular maintenance and cleaning**
To ensure the normal operation of the equipment and extend its service life, regular maintenance and cleaning work should be carried out. This includes cleaning the surface of the equipment, cleaning internal debris, checking lubrication, etc. If necessary, professional personnel can be contacted for more in-depth maintenance and upkeep work.
**10、 Troubleshooting and recording**
During use, if there is a malfunction or abnormal situation of the equipment, it should be stopped in a timely manner and checked. At the same time, fault phenomena and handling methods should be recorded for future analysis and improvement. For unresolved faults, professional personnel should be promptly contacted for repair.
Through the correct operation and maintenance in the above ten aspects, the normal operation and safe use of the mechanical electric rolling machine can be ensured, and the production efficiency and equipment life can be improved.
