How can Manhart (Guangdong) CNC Machine Tool Co., Ltd. reduce the noise of the joint punching and shearing machine?

To reduce the noise of the combined punching and shearing machine, the following measures can be taken:
1. * * Ensure that the machine is in good technical condition * *: Regular maintenance and upkeep of the joint punching and shearing machine to ensure that it is in optimal working condition, in order to reduce noise caused by machine malfunctions or poor operation.
2. * * Check and replace worn parts * *: Regularly inspect all components of the punching and shearing machine, especially those that are prone to wear, such as bearings, gears, etc. Once severe wear is found, it should be replaced in a timely manner to reduce noise caused by friction.
3. * * Optimize cutting process * *: Reasonably adjust process parameters such as cutting speed and cutting force to reduce the load on the machine during the cutting process, thereby reducing noise.
4. * * Strengthen lubrication * *: Add qualified lubricating oil and grease according to regulations to ensure that all moving parts are fully lubricated, reduce friction and noise.
5. Installation of Silencers or Sound Insulation Devices: Install silencers near the machine exhaust or critical noise sources, or set up sound insulation panels around the machine to absorb and reduce the spread of noise.
6. * * Keep the machine clean * *: Regularly clean the surface of the machine of dust and debris to ensure good heat dissipation and reduce noise caused by overheating.
7. * * Improve operator skills * *: Train operators to master the operation skills of the machine proficiently, avoiding improper or erroneous operation that may cause increased noise.
8. * * Reasonably arrange work hours * *: Whenever possible, use a combined punching and shearing machine during daytime or low-noise periods to reduce the impact on the surrounding environment and personnel.
By taking the above measures, the noise of the combined punching and shearing machine can be effectively reduced, the quality of the working environment can be improved, and it also helps to protect the operator’s hearing and health.