The machining method of CNC rolling and bending machine with circular bending machine

The machining method of CNC rolling and bending machine with circular bending machine
The CNC rolling and bending machine uses a small triangular machine to transmit torque from the motor pulley shaft to the V-shaped pulley shaft at the other end. The motor pulley has a small gear, and the power is transmitted from the small gear shaft to the large gear. The large gear shaft is installed in the clutch mechanism, usually with the large gear idling. When the large gear is driven by the driven drive shaft, it drives up and down linear motion through the eccentric shaft sliding frame connecting rod to achieve the purpose of bending and forming.
The hydraulic system of the aluminum profile rolling and bending machine has been overheated, and the following measures have been taken:
(1) The design of the tank with a certain size, when installing the cooler, should avoid excessive separation of the system due to the ambient temperature.
(2) For a long period of time, when high-pressure oil is not needed, the valve will return to the overflow groove. The design should be improved by using a variable displacement pump or.
(3) The line should be as short as possible, not too thin, bent, and the oil flow should be as smooth as possible. CNC bending machine manufacturer.
(4) In areas where pumps and connections are easy, high sealing leakage should be avoided, and members should be tightened to prevent volume loss and heat generation.
(5) When the set value of the regulator is high, it is good to reduce unnecessary energy loss through pressure.
(6) Select hydraulic oil with appropriate viscosity for CNC rolling and bending machines.
Manhart CNC Machine Tool Co., Ltd. in Shunde District, Foshan City produces and processes CNC punching machines, hydraulic combined punching and shearing machines, CNC bending machines, circular rolling machines, and other products, with a complete and scientific quality management system. The product mainly adopts hydraulic transmission, which can shear, punch, die shear, bend, and roll plates, square steel, round steel, angle steel, channel steel, etc. It is widely used in the professional production fields of decoration, metallurgy, ships, automobiles, machinery, military equipment, electrical appliances, and steel structures.
Manhat CNC Machine Tool Co., Ltd. in Shunde District, Foshan City has been recognized by the industry for its integrity, strength, and product quality. We welcome friends from all walks of life to visit, guide, and negotiate business with us.
Future Outlook Sales And Service
Under continuous product development and continuous improvement, as well as the emphasis on enhancing customer service quality, Manhart products are widely loved by customers and have achieved a high market share. Your valuable feedback and support are the driving force behind our continuous progress and progress.
Manhart will strive to improve quality and achieve customer satisfaction from all over the world with the spirit of rising sun and facing the sun, under the concept of continuous improvement.
Quality Control
Manhart product quality ensures customer satisfaction! Strict quality control is a key factor for our success in the market. The key components are all produced through the company’s automated production line and modern equipment. The quality control department of the company inspects every aspect of the work to ensure compliance with the company’s quality requirements and standards. Each device needs to undergo strict quality inspection and testing before shipment to ensure the factory quality assurance of the machine.