Manhart What are the safety operating procedures for electric rolling machines?

**Safety operating procedures for electric plate rolling machines**
1、 Introduction
Electric plate rolling machine is an important metal processing equipment, and its safety operating procedures are of great significance for ensuring production safety, protecting personnel health, and ensuring the normal operation of the equipment. This regulation aims to provide safety operating procedures for electric plate rolling machines to guide operators in the correct and safe use of electric plate rolling machines.
2、 Equipment management
1. The electric rolling machine should be managed and maintained by a dedicated person to ensure that the equipment is in good condition.
2. The equipment should be placed on a flat and stable ground, and the surrounding environment should be kept clean and free of debris interference.
3. The equipment should be regularly inspected and maintained, and faults and hidden dangers should be promptly eliminated to ensure the normal operation of the equipment.
3、 Preparation for startup
Before starting up, check whether all components of the equipment are intact, whether the wires and cables are firmly connected, and whether the safety protection devices are complete and effective.
2. Check if the power supply voltage meets the equipment requirements to avoid damage to the equipment caused by high or low voltage.
3. Operators should wear personal protective equipment, such as helmets, protective goggles, gloves, etc., to ensure personal safety.
4、 Personal protection
1. Operators should stand in a safe area to avoid being injured by equipment or materials, collisions, and other injuries.
2. Operators should wear labor protection equipment that complies with regulations to avoid injuries to the body caused by flying sparks, metal fragments, etc.
3. Operators should maintain concentration and not engage in activities unrelated to the operation during the operation process.
5、 Operation process
1. Turn on the power switch and start the device.
2. Adjust the parameters of the equipment as needed, such as the diameter and speed of the rolling plate.
3. Place the metal material to be processed in the designated position on the equipment and clamp it firmly.
4. Start the rolling machine and start the rolling operation.
During the rolling process, the operator should closely observe the operation of the equipment and promptly stop the machine to handle any abnormal situations.
After completing the rolling process, turn off the power switch of the device and clean the surrounding environment.
6、 Precautions
1. During the operation, do not disassemble or adjust the components of the equipment at will.
2. It is prohibited to insert hands or other objects into the moving parts of the device to prevent accidents.
3. Do not overload the equipment to avoid damage or safety accidents.
4. It is prohibited to carry out maintenance work such as cleaning and lubrication during equipment operation.
5. In case of any abnormal situation during the operation, the machine should be stopped immediately and professional assistance should be sought.
7、 Fault handling
If the equipment malfunctions, the operator should immediately shut down and cut off the power.
2. Notify professional maintenance personnel to conduct inspections and repairs, and it is strictly prohibited to disassemble or repair equipment without authorization.
3. Do not restart the equipment for operation until the fault is resolved.
8、 Maintenance and upkeep
1. After using the equipment, the surface and surrounding environment should be cleaned of oil, dust, and other debris in a timely manner.
2. Regularly inspect and maintain various components of the equipment, such as replacing worn parts, lubricating transmission components, etc.
3. Regularly inspect and maintain the electrical system of the equipment to ensure firm circuit connections and correct wiring.
4. Maintenance work should be carried out by professional personnel, and operators are not allowed to do it privately.
9、 Summary
The safety operating procedures of electric plate rolling machines are an important guarantee for ensuring the normal operation of equipment and protecting the health of personnel. Operators should strictly abide by the provisions of this regulation to ensure the safety and effectiveness of the operation process. At the same time, enterprises should also strengthen the training and management of operators, improve their safety awareness and operational skills.