Manhart How to determine whether the daily maintenance of the fully electric servo bending machine is in place?

To determine whether the daily maintenance of the fully electric servo bending machine is in place, observations and evaluations can be made from the following aspects:
1. * * Cleanliness inspection * *:
-The shell, workbench, and interior of the bending machine should be free of obvious dust, oil stains, and debris accumulation.
-The radiator and fan sections should be kept clean to ensure good heat dissipation performance.
2. * * Lubrication situation * *:
-The lubrication system oil level of the equipment should be within the normal range, and the oil quality should be clear and free of impurities.
-The lubricating oil pipeline and nozzle should be unobstructed, and the flow of lubricating oil should be unobstructed.
-The lubricating oil or grease of the servo motor should be replaced regularly according to the manufacturer’s recommendations to ensure lubrication effectiveness.
3. * * Tightening condition * *:
-The connectors, wiring terminals, screws, and other parts of the servo motor should be tightened without looseness.
-The mechanical transmission part and electrical wiring should be regularly inspected to ensure that the connections are firm and reliable.
4. * * Temperature monitoring * *:
-The temperature of the servo motor should be within the normal range without overheating.
-If a temperature monitoring device is installed, temperature data should be regularly checked and recorded.
5. Electrical system inspection:
-The electrical circuit should have no aging, breakage, or other issues, and the control system should operate normally.
-The power supply should be stable and reliable, without voltage fluctuations or short circuits.
6. * * Functional testing * *:
-Regularly conduct operational tests on the equipment to check if its functionality is normal.
-Pay special attention to the movement of the slider and the display of the CNC system to ensure that the equipment operates normally.
7. * * Recording and Feedback * *:
-Regularly maintain records of equipment, including the time and content of cleaning, lubrication, tightening, and other work.
-For problems and abnormal situations discovered, maintenance personnel or manufacturer technical support should be notified in a timely manner for handling.
8. * * Comply with operating procedures * *:
-Operators should strictly follow the operating procedures and safety operating standards to ensure the stable operation of the equipment.
-Unauthorized disassembly of equipment or dynamic or static adjustment of components is prohibited to avoid equipment failure or personal injury.
By observing and evaluating the above aspects, it can be comprehensively judged whether the daily maintenance of the fully electric servo bending machine is in place. If all indicators meet the requirements and the equipment operates stably and functions normally, it indicates that the maintenance work has been done properly. If there are deficiencies or abnormal situations found, timely measures should be taken for improvement and repair.