Manhart (Guangdong) CNC Machine Tool Co., Ltd. suggests how to use laser machines

The usage steps of the laser machine are as follows:

Turn on the power, check the waterway and circuit for accuracy before starting the machine.

Connect the incoming power and turn on the key switch. At this time, the machine’s ventilation and refrigeration system is powered on, and the ammeter shows a value of 7A.

Turn on the power of the galvanometer.

Open the computer and retrieve the marking file.

Adjust the laser power supply to the working current (10-18A).

After adjusting the focal length, you can start marking.

In addition, after the marking is completed, turn off the power supply of each component in reverse according to the above sequence: adjust the working current of the laser power supply to the minimum (about 7A), turn off the computer, turn off the power supply of the galvanometer, press the stop button, turn off the key switch, and disconnect the incoming power supply.

Please note that the above are only the basic steps for using the laser machine, and the specific operating methods may vary depending on the model and manufacturer. It is recommended to read the laser machine user manual or consult a professional before operation.