غير مصنف

Maintenance and upkeep methods for Manhart CNC bending machine molds

23 فبراير

1、 Regular inspections

To ensure the normal operation of the Manhart CNC bending machine mold, regular comprehensive inspections must be carried out. The inspection cycle can be determined based on the frequency of use and the condition of the mold, and it is usually recommended to conduct inspections at least once a month. The inspection content includes:

  1. The wear and tear of the mold should be repaired or replaced promptly if any abnormalities are found.
  2. The positioning accuracy and clearance of the mold ensure that it meets production requirements.
  3. Ensure that the fixing screws and connectors of the mold are not loose.
  4. The cooling system of the mold ensures normal circulation of coolant.
  5. The safety protection device of the mold ensures its normal function.

2、 Cleaning and maintenance

Maintaining the cleanliness of the Manhart CNC bending machine mold is crucial for its normal operation. After each use, the mold should be cleaned to remove residues and impurities. When cleaning, attention should be paid to:

  1. Use appropriate cleaning agents to avoid corrosion to the mold.
  2. When cleaning, avoid scratching the surface of the mold, especially in the polished area.

For parts that are difficult to clean, compressed air or a brush can be used for cleaning.

3、 Lubrication treatment

Regular lubrication is essential to extend the service life of the Manhart CNC bending machine mold. When lubricating, attention should be paid to:

  1. Use lubricants compatible with the mold to avoid damage to the mold.
  2. Follow the manufacturer’s recommendations for lubrication and ensure even lubrication.
  3. Avoid excessive or insufficient lubrication to avoid affecting the normal operation of the mold.

4、 Tightening parts

The fastening parts of the Manhart CNC bending machine mold are crucial for its stability. Regularly inspect and tighten the screws and connectors of the mold to ensure they are not loose. Loose screws and connectors should be repaired or replaced in a timely manner. When tightening, attention should be paid to:

  1. Use appropriate tools for tightening to avoid damage to screws and connectors.
  2. Follow the manufacturer’s tightening specifications to ensure that the tightening effect meets the requirements.
  3. For parts that require pre tightening, they should be tightened according to the pre tightening force requirements.

5、 Cooling system

The cooling system of the Manhart CNC bending machine mold is crucial for preventing overheating and maintaining accuracy. Regularly check the flow of coolant to ensure there are no blockages or leaks. If necessary, the coolant should be replaced in a timely manner. Attention should be paid to the maintenance of the cooling system:

  1. Use appropriate coolant to avoid corrosion or blockage of the system.
  2. Regularly clean the cooling system to remove impurities and sediment.
  3. Check the flow rate and temperature of the coolant to ensure that it meets production requirements.
  4. Regularly replace the coolant to prevent spoilage and bacterial growth.
أحدث To improve the service life of Manhart CNC bending machine molds, attention needs to be paid to the following aspects:
الرجوع للقائمة
اكبر سنا Detailed explanation of Manhart CNC bending machine mold technology