العربية 
English 
Français 
Русский 
简体中文 
Tiếng Việt 
Español de Venezuela 
Español 
Tagalog When the components of the CNC bending machine become loose, the following steps should be followed for handling:
1. * * Check for loose parts * *: First, it is necessary to determine which parts are loose. This may include bases, pressure plates, clamping devices, sliders, oil cylinders, etc.
2. * * Use appropriate tools * *: Choose appropriate tools for tightening based on the type of loose component. For example, for components with loose screws, it may be necessary to use a screwdriver or wrench.
3. * * Adjust or replace components * *: If the components are severely loose, adjustments or replacements may be necessary. For example, if the base is loose, it may be necessary to use a spirit level to adjust its levelness and tighten the base with screws. If the connection between the slider and the oil cylinder is loose, the connection nut between the slider and the oil cylinder should be rechecked and tightened.
4. * * Check relevant systems * *: After tightening loose components, it is necessary to check whether the relevant systems are operating properly. For example, if the pressure plate or clamping device is tightened, it is necessary to check whether the clamping force and clamping force of the bending machine are evenly distributed.
5. Regular maintenance: To avoid component loosening, it is recommended to perform regular maintenance. This includes cleaning machine tools, lubrication and maintenance, inspecting electrical and hydraulic systems, etc.
6. * * Record and Report * *: After handling loose parts, relevant information should be recorded and reported to relevant departments or personnel. This helps to track the maintenance status of the equipment and take further measures when necessary.
Please note that handling loose parts of CNC bending machines requires professional knowledge and experience. If you are unsure how to handle it, it is recommended to contact professional technicians for repair.
