CNC bending

Description

  specifications

type :MHT-40T/ 1600                                                                                                                                nominal pressure (KN):400                                  Workbench length(mm):1600
Column spacing(mm):1280                                                                                                                      throat depth(mm):250                                            Slide stroke(mm)：120
Maximum opening height between workbench and slider (mm)：350

Slide travel speed：no-load(mm/s)60 adjustable、work(mm/s)12、return trip (mm/s)75
main motor：rotational speed (r/mm)1440、power (kw)4、model Y132S-4 B35
Maximum working pressure of hydraulic system (mpa)：25

characteristic

The synchronization system of the torsion bending machine consists of a torsion shaft, a swing arm, joint bearings, etc. It has a simple structure, stable and reliable performance,

and high synchronization accuracy. The mechanical stopper is adjusted by a motor and    controlled by a numerical control system. The slider part adopts hydraulic transmission,

and is composed of a slider, an oil cylinder, and a mechanical stopper fine adjustment structure. The left and right oil cylinders are fixed on the frame, and the piston (rod)

drives the slider to move up and down through hydraulic pressure. The mechanical stopper is controlled and adjusted by the numerical control system. Material blocking mechanism:

The bending machine uses motor transmission to block the material, which drives     the two screw rods to move synchronously through chain operation. The CNC system controls the

size of the material blocking